This air pump is the perfect choice for your aquarium!
With a power of 4W, it can pump up to 2 × 150 litres per hour. Suitable for aquariums of 150–200 litres. It features non-slip feet and double safety insulation. For optimal performance, don’t forget to clean or replace the airline tubing or air stone regularly. Always choose the right model for your tank.

• Power 4.0W, works with 220–240V, 50–60Hz
• Maximum output 2×150L/h
• Suitable for aquariums of 150–200L
• 2 air outlets for circulation
• Non-slip rubber feet
• Double safety insulation
• Cable length 830mm

Maintenance instructions
• Never immerse the pump itself in water (fig. 1).
• Place the pump above water level (fig. 2a) or use a check valve (fig. 2b).
• Clean or replace the airline tubing and air stone regularly.
• Replace the air filter when dirty.
• Remove the device if the cord is damaged.
• Always use under adult supervision if handled by minors or people with disabilities.

Material
ABS plastic and silicone

Air pump models and technical specifications

Instructions & Safety Guidelines

Place the air pump so that it cannot fall into the water. If the pump does fall into the water, disconnect it immediately from the power supply.
Never put oil on or into the pump.
Clean or replace the airline tubing and air stone regularly to ensure maximum air supply and longer service life.
If the cord is damaged, the device must be removed from use.
If the product is used by a minor or a person with a physical disability, it should always be under adult supervision.
When connected, the plug must always remain accessible.

Safety instructions and usage guidelines:
Always disconnect all electrical devices in the aquarium before putting your hands into the water.
Never immerse the pump (fig. 1). Always place the pump above the water level (fig. 2a) or use a check valve (fig. 2b) to prevent water from entering the pump.

Maintenance: Replace the air filter immediately if it is dirty. Replace the air outlet if it is blocked.